Showing posts with label M-1967. Show all posts
Showing posts with label M-1967. Show all posts

Sleeping Equipment Carrier M -1967

M-1967 MLCE

Sleeping Gear Carrier

1968

....


....


Nomenclature
CARRIER, SLEEPING GEAR


History 

You can clip the rings onto the hooks of a set of M1967 suspenders to wear the bag up on the back of your shoulders. Or the sleeping bag carrier can be worn lower and attached with hook and loop fasteners or loop through your ALICE pack with the wrap-around straps. 

Approx. 13 1/2'' by 11'' inches

It is fabricated of Army shade 106 olive green, water repellent treated, 7.25 ounce nylon duck.

It is designed to be attached to the belt by a hook and pile loop fastener, or to the back suspender shoulder strap hooks by D-rings and to the back suspender extension straps by hook and pile loop fasteners.

Specification

  • LP/P DES 18-67, superseded by MIL-C-43731.

Nomenclature

  • CARRIER, SLEEPING GEAR

Logistics

  • 8465-935-6813

vv










yy




SELECTED ARTWORKS IN THE COLLECTION


....








Field first aid dressing-unmounted magnetic compass case

LC-1 Compass/First Aid Pouch
Field first aid dressing-unmounted magnetic compass case
NSN 8465-00-935-6814
(April 24, 1968)




Case, Field First Aid Dressing - The field first aid dressing case is constructed of Army Shade 106 olive green water repellent treated 7.25 ounce [206 g] nylon duck. It is 8 1⁄2 inches (22 cm) long with flap open; approximately 4 1⁄2 inches (11 cm) wide, and forms a 4 inches (10 cm) deep pocket. It has a metal snap-type fastener closure and is attached to the individual equipment belt or individual equipment belt suspenders by a belt-strap keeper with interlocking slide. The field first aid dressing case is designed to accommodate either the Dressing, First Aid, Field[NSN 6510-00-159-4883] or the Compass, Magnetic, Unmounted [NSN 6605-00-151-5337].








CASE, FIELD FIRST AID DRESSING UNMOUNTED MAGNETIC COMPASS
 DSA100-68-C-2743 8 -09-









U.S.Army Canteen Cover DSA 1968 Un-issued


Vietnam War Unissued US Army Canteen Cover 1968 Dated












Vietnam War era
Standard OD nylon construction.
Marked on the back, "Cover, Water Canteen, Nylon, 1 Quart".
DSA 100-68-C-1680"
Brownish-OD web clip reinforcement tab marked "16".
"US" on front with purification tablet pouch.
Fake fur lined.
Black metal snaps and fittings.






























M-1967 Modernized Load-Carrying Equipment - MLCE Items



M-1967 Modernized Load Carrying Equipment - MLCE

... 
..






.......


History

The M-1967 MLCE has the following components: 

M-1967 Davis Pistol Belt

Belt, Individual Equipment Medium [NSN 8465-00-935-6815]

Belt, Individual Equipment Large [NSN 8465-00-935-6816]

Carrier, Intrenching Tool [NSN 8465-00-935-6826]

Carrier, Sleeping Equipment [NSN 8465-00-935-6813]

Case, Field First Aid Dressing - Unmounted Magnetic Compass

[NSN 8465-00-935-6814]

Cover, Water Canteen [NSN 8465-00-860-0256]

M1967 Butt Pack

Field Pack [NSN 8465-00-935-6825]

M1967 H suspenders

Suspenders, Individual Equipment Belt [NSN 8465-00-935-6830]

The following individual equipment items are issued alongside the M-1967 MLCE:

Cover, Water Canteen, 2-Quart, Collapsible [NSN 8465-00-927-7485]

Rucksack, Tropical [NSN : 8465-00-935-6673]

Vest, Ammunition Carrying, 40mm [NSN 8465-00-141-0926-series]

In 1969 a new version of the "Case, Small Arms Ammunition" is introduced for use with the 30-round cartridge magazine for the Rifle, 5.56 Millimeter, M16A1 :

M1969 M16 30 round pouch

Case, Small Arms Ammunition [NSN : 8465-00-926-6610]

M1967 M14 Magazine Pouch

Case, Small Arms Ammunition [NSN 8465-00-935-6780]


NOTE: all component items that utilize snap fasteners for closure have plastic snaps. After 1969 these are replaced with metal versions.


SELECTED ARTWORKS IN THE COLLECTION

....








M-1967 Modernized Load-Carrying Equipment - MLCE



M-1967 Modernized Load Carrying Equipment - MLCE

...
..

....



History
M-1967 Modernized Load Carrying Equipment - MLCE

USMC M-1967 Pack Sytem
M-1967 Modernized Load Carrying Equipment - MLCE


The M-1967 Modernized Load-Carrying Equipment (MLCE), initially termed Lightweight Load-Carrying Equipment (LLCE) , was developed specifically for use in Southeast Asia. Its issue began in 1968, but never fully replaced the LCE nor was it issued in complete sets.Components of the lightweight load-carring equipment are similar in design to components of standard M-1956 individual load-carring equipment .

Because nylon materials and aluminium hardware are lightweight ,they are used where possible instead of cotton materials and brass or steel hardware .The nylon materials are water resistant ,retain less moisture , snd dry faster .Detail on Description , Fitting and principle of use of components of standard M-1956 individual load carring equioment , which are the same as those for light-weight load-carring equipment ,exept for differences noted ,are contained in FM 21-15

Nylon's light weight and durable qualities led the United States Army to consider the MLCE for Army-wide adoption. A study was undertaken in the early 1970s to identify any shortcomings and to propose improvements for a new load-carrying equipment system to replace the LCE and MLCE.
The MLCE continued to serve the Army well into the 1970s until replaced by the ALICE.
M-1967 Modernized Load Carrying Equipment - MLCE The M-1967 Modernized Load-Carrying Equipment (MLCE), initially termed Lightweight Load-Carrying Equipment (LLCE) , was developed specifically for use in Southeast Asia. Its issue began in 1968, but never fully replaced the LCE nor was it issued in complete sets.Components of the lightweight load-carring equipment are similar in design to components of standard M-1956 individual load-carring equipment . Because nylon materials and aluminium hardware are lightweight ,they are used where possible instead of cotton materials and brass or steel hardware .The nylon materials are water resistant ,retain less moisture , snd dry faster .Detail on Description , Fitting and principle of use of components of standard M-1956 individual load carring equioment , which are the same as those for light-weight load-carring equipment ,exept for differences noted ,are contained in FM 21-15 Nylon's light weight and durable qualities led the United States Army to consider the MLCE for Army-wide adoption. A study was undertaken in the early 1970s to identify any shortcomings and to propose improvements for a new load-carrying equipment system to replace the LCE and MLCE. The MLCE continued to serve the Army well into the 1970s until replaced by the ALICE.

Overview

Overview of the MLCE System

This was not meant as a replacement for the M1956 LCE, mearly it was meant for supplemantary use in Southeast Asia ONLY as M1956 LCE was still standard elsewhere. It was probably never issued in complete sets was allways intermixed in with the old M1956 canvas equipment. Some of the items were made en masse, but some of the items had contracts canceled or reduced before many could be made. Because of this the collectors have wildly driven up the prices on and some of it is still very cheap. My opinions will mostly be in how these early items could be integrated in with the later gear. A lot of the noncoms did just this and held onto some of the more usefull items well into the Alice era.

M-67 BUTT PACK
M-67 COMPASS/FIRSTAID POUCH
M-67 SLEEPING GEAR CARRIER




SELECTED ARTWORKS IN THE COLLECTION

....




Intrenching Tool Collapsible M1967

M-1967 MLCE

Intrenching Tool Carrier

1969

....


....

Nomenclature

CARRIER, INTRENCHING TOOL, COLLAPSIBLE,




History 



M1967 nylon intrenching tool cover, dated 1969. This is the cover that was used to carry the Tri-Fold intrenching tool. The olive nylon is in mint condition with no visible rips or tears. The US stamp on the front is nice and crisp, as well as the text inside the front flap. The front spring-catch enclosure secures nice and tight with alice-style clips on the back. The metal on the interior is free of any corrosion.


The text inside the flap reads:

CARRIER, INTRENCHING TOOL, COLLAPSIBLE,
LIGHTWEIGHT, (NYLON)
DSA100-69-C-1711
8465-935-6826
EASTERN CANVAS PROD. INC.


The back is numbered with a 23.

M1967 Tri-folding E-Tool and Case
M1967 Collapsible Entrenching Tool

Carrier, Entrenching Tool - The M-1967 nylon Entrenching tool carrier was replaced by a molded one manufactured from ethylene-vinyl acetate [EVA].

Carrier, Entrenching Tool - The Entrenching tool carrier is molded of ethylene-vinyl acetate [EVA] and the top flap is secured by means of two metal snap fasteners. It attaches to the individual equipment belt by means of two belt-strap keepers with interlocking slides. The Entrenching tool carrier is designed to accommodate the lightweight collapsible Entrenching Tool, Hand [NSN 5120-00-878-5932].


The tool is capable of being used as a shovel when fully extended and as pick when the shovel blade is locked in positioned at a 90-degree angle. Intrenching tool features: a hinged shovel; D-type hand grip; one serrated cutting blade edge; one axe blade

Carrier

Carrier, Entrenching Tool Intrenching Tool Collapsible Lightweight (Nylon)
NSN# 8465-935-6826
Experimental, Belt loop and M-1910 wire hanger for attachment


Specification


Nomenclature


Logistics



.......










yy


SELECTED ARTWORKS IN THE COLLECTION


....












Second Model

Belt clips on the back, a plastic buckle on the front, the sides are reinforced with plastic on the inside
Has front quick buckle closure pocket
Two alice clips on the back to attach to your ALICE equipment ( vest or pack )
Approx. Size  1.75" x 6" x 10"