...
https://web.archive.org/web/20051203031849/http://www.aitesusa.com/pages/1/index.htm
AITES SECTOR 1
PN: 3080
Organizer, Field. Multi Pocket, w/Book PN: 3080 / ACU
Made of 1000 denier water resistant nylon, reinforced plastic. it has heavy mil-spec ykk zipper for easy access and t0 protect contents. designed for the standard 5 x 8 issue hard cover green book. outside pocket for alcohol pens and other markers. inside has five pockets for protectors and information inserts. this case when made for the usmc has an ega stamped on the front pocket.
PN : 5010 / PN: 5011
M16 Sling, Tactical, 3 Point, PN : 5010
M4 Sling, Tactical, 3 Point, PN: 5011
a. for m16. b. for m4. c. for saw. the sling has been uniquely designed and as most of our products are covered by one or more us patents or have patents pending. the sling can be adjusted to any size or shaped user. the one sling is so manufactured, that it can be used by either a right or left-handed shooter . it also has a quick release buckle which facilities easy removal from a downed operator.
PN : 5050
cover, hydration, system pn: 5050 / ACU
this is a heavily insulated carrier for the standard hydration system. used with the dod direct supplied hydration unites. it has an adjustable right and left set of shoulder straps and a center adjustment strap to hold it securely in place.
pn: 4263
panel, grenade, fragmentation x 6, pn: 4263 $40.00
holds six m65 hand grenades. this unique tactical combat component comes in horizontal or vertical variations. it allows quick access and use of the standard m65 hand grenade. each pocket holds not only the safety leaver/spoon, it also utilizes a three quarter inch safety strap to secure each of the grenades. sametime allowing the confidence that this lethal piece of ordinance, is totally secure until ultimate use.
pn: 3840
case, ifak [ individual first aid kit ], pn: 3840 $21.50
this is the standard case for the new usmc first aid kit. it is adaptable to the dod vest system. it has two inside pockets and a quick release buckle in the front. although this item is the case only, if the dod/ government costumer requires, it can be supplied as a complete kit with the current standard issues contents or additional certified medical supplies.
PN: 2742
Holster, Leg, 9mm w/Modular Magazine Case, PN: 2742
This holster comes with a single modular magazine case. the design allows the operator to easily attach two cases to the holster. one on the side and other running along the face of the holster. the modular case is the standard aites single magazine case. one case could be used for its intended purpose and the other case could accommodate a tactical folding knife , led flash light, multi-tool, or monocular. this piece of equipment also comes with two attaching unites. one to adapt to the interceptor or the aites, tactical/ ballistic vest and the other to attach to the standard bdu belt. via a quick release buckle and the holster can be detached from the vest and without major adjustment or complete removal of the unit be attached to the bdu belt via the second adapter. it is constructed to afford the weapon as much protection as possible. water and moisture resistant 1000 and 500 denier nylon materials are used with a heavy plastic and .25 inch single cell foam lining. it is double stitched and bar tacked in stress areas. it has a tactically quick thumb release pistol retaining strap and a combat safety/travel heavy duty elastic attaching strap. although originally designed for the dod m9, 9mm pistol it will handle other 9mm pistols currently being used by ussocom and other government agencies.
aites sector 2
pn: 2748
panel, leg, multipurpose, pn: 2748 $33.75
this item can be worn on either the right or left leg. it comes with an adapter which integrates into all dod vest systems or an adapter which attaches to the standard bdu/trouser belt. depending on the mission and/or needs of the user, it allows quick access to additional pouches and cases that are attached to it, popular variations are for the m203 gunner to attach two aites 40mm x 5 grenade cases, for an additional 10 rounds of ammunition. this item allows for extra magazines, explosives or medical equipment. panel heavily padded completely quick release buckle.
pn: 2835
shoulder panel, multipurpose, pn: 2835 $29.98
this piece was designed to facilitate mission specific uses. it allows the individuals, in addition to their standard issue, to carry additional cases or pouches. affords the user the opportunityto carry explosives, extra ammunition, communication equipment and medical supplies and the whole panel is equivalent to thirty two percent of all current dod tactical vest systems. complete with all purpose carrying strap.
pn: 2740
case, grenade, m203 40mm he/pyro x 3, pn: 2740 $22.50
it is designed to hold both high explosive and/or pyrotechnic (illumination) m203 grenade. it has three pockets with individual adjustable flap. each flap has a covered snap and hook & loop system to assure a safe and secure closure of each pocket. it is modular and depending on the mission, can be mounted in any configuration on all dod tactical vest systems.
pn: 2847
firing sleeve, (mortar mitt) 60mm , pn: 2847 $32.50
this was designed to allow a mortar team to fire their weapon by holding it while the other crews set up, in the conventional way or firing while on the move. it is constructed with a 1000 denier nylon and an insert of special heat resistant core to protect the user and finger. positioning straps for safe nonslip use. this is the ultimate in stealth for the mortar crew.
pn: 4240
case, tactical, drop empty magazine (mag-bag) pn: 4240
this product was designed and manufactured, in part, based on after action reports from the ussocom in conjunction with the usmc. its intended purpose, is to facilitate the quick discarding of empty magazines from weapons during tactical encounters with hostel forces, where every second is critical; later empty magazines can easily be retrieved for reloading and reuse. it can be used with the m16 and m4 rifles, mp5 submachine gun or 9m pistol. remember, after the battle your stealth may distinguish you from the quick and the dead.
pn: 4300
case, magazine, m16 x 1 rifle buttstock, pn: 4300
this (specially made) case gives the marine or soldier rifleman an extra 30 round magazine that’s always with his weapon. it mounts easily on the left or right of the butt stock and does not interfere with the use of the aites ambidextrous, tactical 3 point sling. universally agreed that you can never have too many loaded magazines. made of 1000 denier nylon.
aites sector 3
pn: 2860
case, compass & gps, dual pouch, pn: 2860 $27.00
this case is designed to protect and hold the standard tritium element, lensatic compass and most gps systems, including most brutons and magellans. it is modular and can be mounted on any of the current dod items that use the horizontal /vertical lacing system for attaching equipment. it is made of 1000 denier nylon and other heavy duty military specification materials.
pn: 2858
case, field note-pad & pen (commanders notebook), pn: 2858 $37.75
this is a multi pocket case, designed to hold all weather notebook and "staedtler" alcohol waterproof pens. the outside pockets are for zippo lighter and lip protector. it is fully padded and reinforced with heavy duty plastic, military snaps and mil-spec hook & loop. it is modular and can be attached to all dod systems. made of 1000 denier nylon.
case, grenade, m203 40mm he/pyro x 5, pn: 2730 $30.00
designed to hold either type of m203 grenade, high explosive or pyrotechnic (illumination). it has individual protective pockets with adjustable flaps. each flap has a covered snap and hook & loop system to assure a safe and secure closure of each pocket. it is modular and depending on the mission, can be mounted in any configuration on all dod tactical vest systems. it is made from heavy nylon material and mil-spec webbing.
pn: 2840
case, multi-purpose, for grenade or compass pn: 2840 $15.00
this case accommodates many items: both old and new model strobe lights , compass, cell phones, nvg mounting device and of course the m65 fragmentation grenade. it has a flap with a covered snap. the pocket is padded to give extra protection. it has a nylon cord with a heavy split ring on the end to hold compass or strobe light. it comes with standard attaching straps. it integrates well onto the face and sides of many of the other aites cases and pouches. made of 1000 denier nylon and .25in foam.
pn: 2848
case, pyrotechnic(flare) pn: 2848 $15.00
this case as all aites equipment, is made of mil-spec materials, and of course made in america. it is designed with the user in mind, it is tactical, with easy opening and closing during combat conditions day or night. made with 1in quick release buckles. many users configure a single one into the leg panel with their aites modular holster and 9mm double or triple magazine case or five of them to the multi-purpose shoulder panel.
pn: 2853
case, fb/chem. grenade, pn: 2853 $12.50
this item was designed to be multipurpose. it holds all flash bangs currently used within the dod inventory and all chemical canister, tear gas/cs&cn, smoke, red, green, violet, white hc, thermite and incendiary, also single m203 40mm he/pyro grenade. adapts to all vest systems and aites side panels. made of 1000 denier material, fully adjustable, top to bottom and circumference.
aites sector 4
pn: 4335
case, ammunition, magazine, m4/m16 x 3, pn: 4335 $19.50
this aites triple magazine case holds three m4/m16 30 rnd magazines in any configuration. utilizes heavy plastic and strapping on the sides for the addition of two baseball grenade pouches, 9mm magazines pouches, aites single flash bang grenade pouches or any other small. made from 1000 denier cordura nylon
pn: 2728
pouch, modular, for m4/m16 magazines (6 mag capacity), pn: 2728 $37.50
this case was made to hold six m16 magazines (30rnd), with the option of additional combat essential items attached to the face of each three pocket case. it can be attached to all current dod vest systems. each case comes with modular horizontal face straps, allowing the addition of: m203 (40mm x 5) case, three individual hand grenade pouches, flash bang/chemical grenade pouches, etc. it can also survive as a support or a resupply item. made of 1000 denier cordura nylon and with 2in hook and loop and covered snaps.
pn: 2750
holster, modular, for 9mm, pn: 2750 $57.75
this holster was designed for the m9, beretta 9mm pistol. it will tactically hold all similarly shaped pistols. it is constructed of water repellant 1000 and 500 denier cordura nylon, with 1/4 inch single cell high density foam, heavy .050 die cut sheet plastic and heavy mil-spec webbing. it is doubled bar-tacked in high stress areas to assure maximum durability and long time protection. your weapon is secured by heavy elastic to insure that the weapon is not lost from the holster. the outside has mounting straps to attach anywhere on the dod series of vests or leg panels. it comes with a modular single magazine case. you can easily attach an additional single magazine case to the side or face of the holster. it can be used as a hip holster mounted at your side or under your arm as a shoulder holster.
pn: 2713 pn: 2716 pn: 2718
case, magazine, 9mm x 1, pn: 2713 $9.00
this case holds a single pistol magazine. aside from it’s original intended purpose because of its shape and size, it holds many different items. many types of led flash lights, multi-tools or tactical folding knives and certain monoculars being modular. it can fit inconspicuously on any number of matching aites pouches and cases.
case, magazine, 9mm x 2, pn: 2718 $19.50 or 9mm x 3, pn: 2716 $24.00
these cases were engineered to hold two or three full size 9mm pistol magazines, in the smallest area possible. they can mount virtually anywhere on the vest system. although both are single modular units, each magazine has an individual pocket. each pocket has an individual closer, with both a snap and heavy duty hook and loop. when a user needs a magazine it will be there.
pn: 2910
panel, ammunition, shot shell, 12ga. x 5, pn: 2910 $12.00
this is designed to fit on any dod vest system or can be mounted on the sides of many of the aites series of cases and pouches. one aites m16/m4 magazine case can have one attached to either side supplying ten rounds of ammunition in a small and confined space . other systems do not provide these features. manufactured with heavy nylon elastic and made rigged with a heavy plastic insert.
pn: 2910
select color
acu
make payments with paypal - it's fast, free and secure!
make payments with paypal - it's fast, free and secure!
pn: 3018
case, saw, box magazine (200 rnd), w/ cleaning kit pouch pn: 3018 $30.75
designed to hold a single plastic box magazine for the 249 saw [squad automatic weapon ]. oringinally used by the saw gunner and because of its design and versatility has now gained enormous popularity with other soldiers. the case has an adjustable closing strap with quick release buckle. attaching straps on the sides and face, allow the mounting of additional cases or pouches. across the top of the lid is a case for cleaning equipment or other items. this case has multipurpose uses; holds saw 200 rnd box, m4/m16 magazines, demolition components, medical supplies, mapping gear or binoculars. although fully mountable has a removable mounting strap. made of 1000 denier cordura nylon. reinforced with heavy duty plastic, with adjustable side quick release nylon buckle. the side and the face attaching straps, allows the users to attach other modular equipment. comes with a detachable cleaning kit pouch.
aites sector 5
pn: 4212
case, night vision device (an/pvs-7b), pn: 4212 $57.50
this case is designed to hold the nvg pvs-7b and its components. padded and reinforced to protect their contents. it is modular and can be integrated into any current dod system, including the (otv) ballistic interceptor vest. it is made of 1000 denier nylon, 500 denier nylon and other heavy duty military specification materials.
pn: 4210
case, night vision device (an/pvs-14), pn: 4210 $48.50
this case is designed to hold the nvg pvs-14. totally padded, comes with an extra padded pocket for the mounting unit that can be attached to either side of the main pocket. it is made of 1000 denier nylon. 500 denier nylon and .25in foam
pn: 2720
case, four pocket, padded utility/canteen, pn: 2720 $25.00
one of the most versatile pieces in the aites system. specially designed with adjustable flap. main pocket is padded, to afford protection to selected items placed in it. the main pocket among many things, accommodates the an/pvs 7bs; 5[five] m4/m16 30 rnds, one qt. canteen, etc. main pocket has an adjustable nylon cord that facilities changing its configuration to hold whatever is placed in it, securely. while the three large outside pockets can hold the lensatic compass, strobe light, claymore electric clicker, various medical components, blasting caps, etc. the advantages of this uniquely designed case end with the users imagination. made out of 1000 denier nylon and other mil-spec materials .
pn: 4320
panel, grenade, fragmentation: 2,( pn:4310) and 3, (pn: 4320) capacity $27.50/$32.50
built to attach tightly to all dod vest systems, affords easy access to current fragmentation grenades. available in two or three capacity, allowing the user to configure the panels to be accessible to his mission and body size. rigged construction, made of 1000 denier nylon and stabilizing insert of high density plastic.
pn: 3060
pack/case (carrier), tactical, radio prc-119f, pn: 3060 $78.00
designed to carry the prc-119f radio, as a back pack with right & left padded pack straps and sternum strap or a case with attaching straps mounting to the front of the vest system. it is rigidly constructed of 500 & 1000 denier nylon with high density plastic inserts and .25in and .50in single cell foam. with external pockets to accommodate the various antenna configurations, easily accessibility to controls. designed to allow the use of two hand held receivers. this new design allows more protection for the radio and freedom and balanced movement for the carrier /operator. this is unlike anything currently in the system or being used. with stealth in mind.
pn: 3040
case/carrier, tactical, radio prc-148 (mbitr), pn: 3040 $42.75
this is built with the same mil-spec materials as its big brother(119f) is, and stealth engineering. this case integrates well into the dod vest systems, tightly held in place. it is modular and is easily accessible. this case comes with a spare battery pocket, for long term field use.
aites sector 6
pn: 2859
aites, adapter, pn: 2859 $9.98
it is small and integrates into any current piece of tactical equipment. it allows the attachment of the old obsolete alice pouches and cases. also the k-bar knife, or supplied separately, two small pockets, for flash light, multi-tool, folding knife, or what ever the imagination finds them, suitable for.
pn: 4250
satchel/pack, ammunition, 60mm mortar x 4, pn: 4250 $64.00
this is designed to be used similarly to a back pack with r&l shoulder straps and sternum strap. it is reinforced with heavy plastic to protect the users’ back and the packs contents. it has a special loop system to hold four 60mm mortar ammunition tubes. straps are precisely placed so it fits correctly and comfortable to the carriers back. although it is specially designed for mortar ammunition, when empty, it can be used to comfortable stow a variety of essential gear.
pn: 4255
case, ammunition, magazine, m4/m16 x 2, pn: 4255 $18.00
a compact modular pouch with a special design feature of heavy memory of nylon elastic that surrounds the magazines securely until needed. after extracting one the other is still griped tightly, no movement no lost magazines. they are there when you need them because of their compact design they can be mounted on any dod vest system.
PN: 4130
Satchel/Case, Ammunition 7.62mm, PN : 4130
designed to hold 200 rnds of linked 7.62mm. ammunition used in conjunction with the 240g machine gun with handle and detachable carrying strap. approximate weight w/200 rnds has fifteen pounds easy to carry with handle and detachable carrying strap with ammunition openings on both ends. reinforced 1000 denier cordura nylon, heavy plastic and quick release buckles.
