...
Nomenclature
PARKA, IMPROVED RAINSUIT
TROUSERS, IMPROVED RAINSUIT
Description
The IRS parka has a roll-up hood with a visor and drawstring closure. There are armpit zippers for ventilation, a heavy full-length zipper in front covered by a storm flap that closes with snaps. The pockets are pass-through to inner garments. The elbows are reinforced and Velcro closures at the cuffs make a tight fit. The parka has inside buttons for attaching the CW coat insulating liner.
The IRS trousers have a draw-string at the waist, a center zipper, pass-through pockets, Velcro closures at the ankles, and long leg zippers for easy on-off. The seat and knees are reinforced.
Both the parka and trouser which comprise the Improved Rainsuit are constructed of the finest American-made fabrics and component parts. The outer shell fabric is waterproof and moisture vapor permeable which will release moisture from within the garment while at the same time maintain a waterproof barrier to the outside elements. All seams are heat taped to ensure waterproof integrity.
Material
The IRS is made of SympaTex, a lightweight breathable, waterproof material made by SympaTex Technologies GmbH. SympaTex is a nylon material that is pliable and moisture-vapor-semi-permeable. It resist external water while allowing perspiration or other moisture to transfer from inside to outside, thereby keeping the wearer dry and comfortable.
TROUSERS, IMPROVED RAINSUIT
Description
The IRS parka has a roll-up hood with a visor and drawstring closure. There are armpit zippers for ventilation, a heavy full-length zipper in front covered by a storm flap that closes with snaps. The pockets are pass-through to inner garments. The elbows are reinforced and Velcro closures at the cuffs make a tight fit. The parka has inside buttons for attaching the CW coat insulating liner.
The IRS trousers have a draw-string at the waist, a center zipper, pass-through pockets, Velcro closures at the ankles, and long leg zippers for easy on-off. The seat and knees are reinforced.
Both the parka and trouser which comprise the Improved Rainsuit are constructed of the finest American-made fabrics and component parts. The outer shell fabric is waterproof and moisture vapor permeable which will release moisture from within the garment while at the same time maintain a waterproof barrier to the outside elements. All seams are heat taped to ensure waterproof integrity.
Material
The IRS is made of SympaTex, a lightweight breathable, waterproof material made by SympaTex Technologies GmbH. SympaTex is a nylon material that is pliable and moisture-vapor-semi-permeable. It resist external water while allowing perspiration or other moisture to transfer from inside to outside, thereby keeping the wearer dry and comfortable.
Specification
CO/PD-99-20
Improved Rainsuit.
CO/PD-99-20
Improved Rainsuit.
Parka design and construction features:
Label attached on the inside of garment to flap panel in back neck area.
Hood with a visor; hood drawcord shall extend beyond the tunnel 10 to 11 inches on both sides.
Bottom hem drawcord shall extend 8 to 9 inches on both sides.
Double closure storm protective front slide fastener with twin slider assembly.
Front insignia tab.
Snap fastener slide fastener protector.
Raglan style sleeves with back arm reinforcement patches.
Slide fasteners under each arm , for ventilation, covered by a welt.
Two lower pocket pass throughs with snap down flaps.
Wrist adjustment tabs with hook and loop closure.
Hook and loop tape at neck to permit roll up of hood.
Button-in liner panels and two button tabs at each sleeve bottom to interface with the standard field coat liner.
Trouser design and construction features:
Label attached and positioned next to seat seam, caught in waist tunnel seam of trousers.
Slide fastener front closure with a snap and drawcord at waist.
Inseam leg gussets with covered slide fastener closure with hook and loop ankle adjustment tabs.
Two front pocket pass throughs with snap down flaps.
Seat and knee reinforcement patches
Trouser drawcord, to extend 8 to 9 inches on both sides.
Sizes
Available sizes are S, M, L, XL
Pricing
DescriptionPrice
Improved Rainsuit Parka 1st $88.50
Improved Rainsuit Trouser 1st $63.00
Label attached on the inside of garment to flap panel in back neck area.
Hood with a visor; hood drawcord shall extend beyond the tunnel 10 to 11 inches on both sides.
Bottom hem drawcord shall extend 8 to 9 inches on both sides.
Double closure storm protective front slide fastener with twin slider assembly.
Front insignia tab.
Snap fastener slide fastener protector.
Raglan style sleeves with back arm reinforcement patches.
Slide fasteners under each arm , for ventilation, covered by a welt.
Two lower pocket pass throughs with snap down flaps.
Wrist adjustment tabs with hook and loop closure.
Hook and loop tape at neck to permit roll up of hood.
Button-in liner panels and two button tabs at each sleeve bottom to interface with the standard field coat liner.
Trouser design and construction features:
Label attached and positioned next to seat seam, caught in waist tunnel seam of trousers.
Slide fastener front closure with a snap and drawcord at waist.
Inseam leg gussets with covered slide fastener closure with hook and loop ankle adjustment tabs.
Two front pocket pass throughs with snap down flaps.
Seat and knee reinforcement patches
Trouser drawcord, to extend 8 to 9 inches on both sides.
Sizes
Available sizes are S, M, L, XL
Pricing
DescriptionPrice
Improved Rainsuit Parka 1st $88.50
Improved Rainsuit Trouser 1st $63.00
....
No comments:
Post a Comment